1955-1959 Chevy/GMC Pickup Cab Corner, Driver Side

5 out of 5 based on 1 customer rating
(1 customer review)
PART#: 0847-115 STARTING AT $63.00

1955-1959 GM Pickup Cab Corner, Driver Side (2nd Series)
This is the Left side panel. You can find the Right side panel here 0847-116

Dimensions: 19x16x10″

Approximate Thickness: 18ga

In stock

You can earn points for purchasing this product.
Brand: Key Parts
  • This field is for validation purposes and should be left unchanged.

Description

This driver side cab corner fits 1955, 1956, 1957, 1958, 1959 Chevy and GMC 2nd Series trucks.

Cab corners get abused from the elements and road debris. They catch road grime and salt which, over time, causes them to rust out. Your 2nd Series truck has been around for awhile, and it’s a truck, so its body panels probably need some TLC. From rockers, to the lower door areas, to the cab corners and floors, it’s probably getting a little soft to the touch.  Luckily we have the replacement panels that can help strengthen your truck’s body.

All of our cab corners are constructed of heavy gauge stamped steel that meets or exceeds the thickness of the original body panel that it’s replacing. The stamping process starts with a 3D scan of an OEM part, which means that these aftermarket panels will be an exact match to the original part’s shape. Since the panels are an exact match, the old panel will need to be cut out so that the new one can be welded in its place.

Each panel is e-coated (EDP) for additional corrosion protection. The e-coating leaves a black finish that can be scuffed and painted over.  For best finishing results we recommend scuffing the e-coat, priming, and then top coating with an automotive grade paint.

Whether you need to replace the driver side, passenger side, or both, we have the body panels that you’re looking for. Fix the rust on your cab corners by ordering this driver side 1955-1959 Chevy 2nd Series cab corner from Raybuck Auto Body Parts today.

Measurement 19x16x10
Weight 5lb

Customer reviews

Rated 5 out of 5 stars
1 review
4 stars 0 0 %
3 stars 0 0 %
2 stars 0 0 %
1 star 0 0 %

1 review for 1955-1959 Chevy/GMC Pickup Cab Corner, Driver Side

Add a review

Use one of the allowed file type: jpg,png. The max size allowed is : 5 MB.

    Questions and answers

      What gage metal are the cab corner's
    1. 0 votes
      Q What gage metal are the cab corner's answer now
      Asked by Gerard McGough on June 11, 2021 10:20 pm
      A I don't remember the gage of the metal, but I recall it was the thicker of the two or three corners I was able to find available. It fit quite well and welded in nicely. And I'm not a sheet metal welder. I was pleased with the overall end result.
      A The cab corners are made of 18 gage steel. Same gage as what you will cut out. The new cab corner will weld in very good. They fit very well. I have replaced inner and outer on both sides. Recomend replacing the inners also. Provides for a better job. Good luck on your truck.
      A Approximately 18ga
    2. What gage metal are the cab corner's
    3. 0 votes
      Q What gage metal are the cab corner's answer now
      Asked by Gerard McGough on June 11, 2021 10:20 pm
      Answered by the admin

      Approximately 18ga