1973-1991 Full Size Blazer Large Rear Wheel Arch Passenger Side

PART#: 0853-126 STARTING AT $157.50

1973-1991 Full Size Blazer/Jimmy Rear Wheel Arch Complete ( w/ Door Lip) Passenger Side

**This panel has a square gas door opening. ** It will need to be modified to fit earlier models with the round gas cap.

Dimensions: 62 1/2″W x 27″H
This is the Right side panel. You can find the Left side panel here 0853-125


Our Freight Shipping Policy applies to this item.
Please note that all freight shipments MUST be inspected prior to the driver leaving. Frieght on large items (bed floors, etc) is estimated and may change based on shipping location. We will contact you prior to shipment if the estimated charge is incorrect.No damage claims can be submitted once you sign the bill of lading and the driver leaves. It is your responsibility to remove items from the carrier's truck, take them out of their packaging and inspect them.Oversize Shipping: Oversize-100

In stock

You can earn points for purchasing this product.
Brand: Key Parts
  • This field is for validation purposes and should be left unchanged.

Description

This 1973-1991 Full Size Blazer Rear Wheel Arch Comp. Passenger Side fits 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 Chevrolet Blazer.

The rear wheel openings on your vehicle are constantly sprayed with salt and road debris as you drive. It’s only a matter of time before the mix of water, salt, and mud causes corrosion to form. Before you know it, you see the dreaded paint bubbles starting to form around the lip of the wheel arch. The good news is that if you catch it in time, you can sometimes replace just the area of the arch that’s rusting out. If paint is already falling off, and you’re able to poke your finger through the side of your vehicle, you may need to replace the entire wheel arch and possibly the inner wheelhouse. Whether the rear wheel opening on your vehicle is just starting to bubble, or is completely rusted out, we have the wheel arch repair panels to help you fix your rust problem.

All of our wheel arch patch panels are constructed of heavy gauge stamped steel that meets or exceeds the thickness of the original body panel that it’s replacing. The stamping process starts with a 3D scan of an OEM part, which means that these aftermarket panels will be an exact match to the original part’s shape. Since the panels are an exact match, the old panel will need to be cut out so that the new one can be welded in its place.

For most trucks, if you’re not as worried about the appearance, you can usually slip these arches over top of your existing panel and secure them with an adhesive like Silaprene. If doing this, we still highly recommend cutting out as much of the rust as possible, and sealing the rusted area with a rust-inhibiting paint, like ZeroRust, prior to installing the new arch.

Each panel has an EDP coating for additional corrosion protection. The e-coating leaves a black finish that can be scuffed and painted over. For best finishing results we recommend scuffing the e-coat, priming, and then top coating with an automotive grade paint.

Whether you need to replace the whole wheel arch or just a portion of it, we have the parts that you’re looking for. Replace your rusted wheel arch by ordering this 1973-1991 Full Size Blazer Rear Wheel Arch Comp. Passenger Side from Raybuck Auto Body Parts today.

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “1973-1991 Full Size Blazer Large Rear Wheel Arch Passenger Side”

Use one of the allowed file type: jpg,png. The max size allowed is : 5 MB.

    Questions and answers

      I want to order both rear quarter skins, how much would the shipping be for them? Is it a separate shipping charge for each or one charge for both?
    1. 0 votes
      Q I want to order both rear quarter skins, how much would the shipping be for them? Is it a separat...... Read more answer now
      Asked by Steven Robinson on April 1, 2023 4:18 pm
      Answered by the admin These are not quarters, these are just extended wheel arches. Shipping would be cheaper together than ordering individually. We provide a shipping calculator in the cart area before any personal information is needed.
    2. Will I have to modify it for a 79 K5 blazer?
    3. 0 votes
      Q Will I have to modify it for a 79 K5 blazer? answer now
      Asked by Peyton on January 13, 2021 10:25 pm
      Answered by the admin If your Blazer has a round gas cap it will have to be modified in that area. The is a large wheel arch and not a complete quarter so this part will need fitted to your existing quarter panel. This part is designed to replace the original metal, not go over it.
    4. Shipping to 50563 for 84 Blazer quarter panel PART#: 0853-126
    5. 0 votes
      Q Shipping to 50563 for 84 Blazer quarter panel PART#: 0853-126 answer now
      Asked by Matt Byrne on December 15, 2020 1:45 am
      Answered by the admin $95.71 for shipping to that zip code