1987-1996 Ford Pickup Complete Wheel Arch, Driver Side

Freight Shipping
PART#: 1982-127 STARTING AT $119.00

This complete wheel arch with dual holes, driver side fits 1987-1996 Ford F-Series Pickup. Also fits 1997 and 1998 old body style trucks.

***Does not fit Dually.

Measurement 62x30x5 Weight 25lb
This is the Left side panel. You can find the Right side panel here 1982-126


Our Freight Shipping Policy applies to this item.
Please note that all freight shipments MUST be inspected prior to the driver leaving. Frieght on large items (bed floors, etc) is estimated and may change based on shipping location. We will contact you prior to shipment if the estimated charge is incorrect.No damage claims can be submitted once you sign the bill of lading and the driver leaves. It is your responsibility to remove items from the carrier's truck, take them out of their packaging and inspect them.

In stock

You can earn points for purchasing this product.
Brand: Key Parts
  • This field is for validation purposes and should be left unchanged.

Description

This 1987-1996 Ford Truck Complete Wheel Arch, Driver’s Side fits 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996 Ford Pickup Truck.

The rear wheel openings on your vehicle are constantly sprayed with salt and road debris as you drive. It’s only a matter of time before the mix of water, salt, and mud causes corrosion to form. Before you know it, you see the dreaded paint bubbles starting to form around the lip of the wheel arch. The good news is that if you catch it in time, you can sometimes replace just the area of the arch that’s rusting out. If paint is already falling off, and you’re able to poke your finger through the side of your vehicle, you may need to replace the entire wheel arch and possibly the inner wheelhouse. Whether the rear wheel opening on your vehicle is just starting to bubble, or is completely rusted out, we have the wheel arch repair panels to help you fix your rust problem.

All of our wheel arch patch panels are constructed of heavy gauge stamped steel that meets or exceeds the thickness of the original body panel that it’s replacing. The stamping process starts with a 3D scan of an OEM part, which means that these aftermarket panels will be an exact match to the original part’s shape. Since the panels are an exact match, the old panel will need to be cut out so that the new one can be welded in its place.

For most trucks, if you’re not as worried about the appearance, you can usually slip these arches over top of your existing panel and secure them with an adhesive like Silaprene. If doing this, we still highly recommend cutting out as much of the rust as possible, and sealing the rusted area with a rust-inhibiting paint, like ZeroRust, prior to installing the new arch.

Each panel has an EDP coating for additional corrosion protection. The e-coating leaves a black finish that can be scuffed and painted over. For best finishing results we recommend scuffing the e-coat, priming, and then top coating with an automotive grade paint.

Whether you need to replace the whole wheel arch or just a portion of it, we have the parts that you’re looking for. Replace your rusted wheel arch by ordering this 1987-1996 Ford Truck Complete Wheel Arch, Driver’s Side from Raybuck Auto Body Parts today.

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “1987-1996 Ford Pickup Complete Wheel Arch, Driver Side”

Use one of the allowed file type: jpg,png. The max size allowed is : 5 MB.

    Questions and answers

      Will this fit my 97 F250hd longed driver's side complete fender or is this only the lower part
    1. 0 votes
      Q Will this fit my 97 F250hd longed driver's side complete fender or is this only the lower part answer now
      Asked by Charlie on June 4, 2023 8:24 am
      A This is not a bedside or a fender, this is a piece of the bed side - measuring 62 inches wide. 30 inches high. this will not go to the top rail, cab, or tailgate.
    2. Do they fit longbeds?
    3. 0 votes
      Q Do they fit longbeds? answer now
      Asked by Edward Kiefer on September 24, 2021 8:38 am
      Answered by the admin Yes, it is only a large arch not a complete bed side , so it will fit long or short bed.
    4. are they for a full size single cab
    5. 0 votes
      Q are they for a full size single cab answer now
      Asked by jeff mosley on July 15, 2021 2:23 pm
      Answered by the admin Yes it will work for that truck. This is a large wheel arch , not a bed side skin.
    6. is welding involved in the replacement?
    7. 0 votes
      Q is welding involved in the replacement? answer now
      Asked by Julio on November 18, 2020 6:49 pm
      Answered by the admin Yes, these panels are designed to be welded in.