2000-2006 Suburban / Yukon XL Rear Lower Quarter Section, Passenger Side

5 out of 5 based on 6 customer ratings
(6 customer reviews)
PART#: 0860-134 STARTING AT $88.40

Order a 2000-2006 Suburban/Yukon XL Rear Lower Quarter Section, Passenger Side from Raybuck

Approximate thickness: 18ga

Dimensions: 16.5″H x 30.5″W
This is the Right side panel. You can find the Left side panel here 0860-133

In stock

You can earn points for purchasing this product.
Brand: Key Parts
  • This field is for validation purposes and should be left unchanged.
SKU: 0860-134 Categories: ,

Description

This 2000-2006 Suburban / Yukon Xl Rear Lower Quarter Section, Passenger Side fits 2000, 2001, 2002, 2003, 2004, 2005, 2006 Chevy or GMC Suburban, Yukon.

Rust doesn’t discriminate. It forms on almost every vehicle and on every exterior steel body panel. If you’re vehicle is exposed to salt spray, it’s most likely going to rust even faster, and usually by the time you see bubbles the situation is a lot worse than it appears. A lot of body panels will rust from the inside out, so those paint bubbles are like the tip of the iceberg. Poke it with your finger and all of the sudden you find a hole that goes completely through the panel. There’s also a good chance that the body panel behind or next to the bubbled one is also rusted. Rust is nasty, but we have the body repair panels to help fix your rust problems.

All of our rust replacement body panels are constructed of heavy gauge stamped steel that meets or exceeds the thickness of the original body panel that it’s replacing. The stamping process starts with a 3D scan of an OEM part, which means that these aftermarket panels will be an exact match to the original part’s shape. Since the panels are an exact match, the old panel will need to be cut out so that the new one can be welded in its place.

Each panel has an EDP coating for additional corrosion protection. The e-coating leaves a black finish that can be scuffed and painted over. For additional rust protection, we offer ZeroRust which is a rust-inhibiting paint, as well as a selection of undercoating materials.

Whether you need to replace a lower quarter panel, a dog leg, a footwell, or door pillar, we have the parts that you’re looking for. Fix the rust on your vehicle by ordering this 2000-2006 Suburban / Yukon Xl Rear Lower Quarter Section, Passenger Side from Raybuck Auto Body Parts today.

Customer reviews

Rated 5 out of 5 stars
6 reviews
4 stars 0 0 %
3 stars 0 0 %
2 stars 0 0 %
1 star 0 0 %

6 reviews for 2000-2006 Suburban / Yukon XL Rear Lower Quarter Section, Passenger Side

Add a review

Use one of the allowed file type: jpg,png. The max size allowed is : 5 MB.

    Questions and answers

      When would i receive this product? 49683 . Would like purchase but need to know delivery.. doesn't tell me..thanks
    1. 0 votes
      Q When would i receive this product? 49683 . Would like purchase but need to know delivery.. doesn'...... Read more answer now
      Asked by Shawn wall on December 23, 2021 11:35 pm
      Answered by the admin We have the part in stock. We are catching up from being off for Christmas. Allow a week for delivery.
    2. DO THESE COME IN DIFFERENT COLORS? HOW IS THIS INSTALLED? LOOKING TO COVER A RUSTED HOLE AREA GETTING BIGGER.
    3. 0 votes
      Q DO THESE COME IN DIFFERENT COLORS? HOW IS THIS INSTALLED? LOOKING TO COVER A RUSTED HOLE AREA GET...... Read more answer now
      Asked by DAVE on October 28, 2021 3:57 pm
      Answered by the admin This is a replacement panel that is designed to have the bad metal cut our and the new panel welded in. The panel comes in black primer and would require bodywork and painting to install.
    4. Suburban Rear Lower quarter section pass. side - do you have in white?
    5. 0 votes
      Q Suburban Rear Lower quarter section pass. side - do you have in white? answer now
      Asked by MICHELLE WILSON on January 18, 2021 12:07 pm
      Answered by the admin Sorry we don't. These are metal panels that will be welded onto the vehicle. The paint that comes on the panel is an EDP coating and should be sanded or removed and then welded and repainted.