Fluid Film 1 Gallon

Description

Fluid Film is a penetrant and lubricant that can also be used for corrosion prevention. It is a non-toxic, long lasting liquid that has been used for over fifty years in the highly corrosive marine environment of ships and offshore drilling rigs.

Fluid Film is formulated from specially processed wool-wax, highly refined petroleum oils and selected agents to provide corrosion control, penetration, metal wetting and water displacement. It contains no solvents so it will not dry out. The thin, wet film that it leaves will penetrate to the base of all metals, providing corrosion protection from both natural and industrial atmospheres. Heavily corroded and/or frozen parts such as nuts, bolts, shafts, etc. that would normally be damaged during maintenance can be salvaged by applying Fluid Film.

Fluid Film rust preventer can be applied to just about any indoor or outdoor surface. In automotive applications, Fluid Film is commonly used around and inside of doors and throughout the undercarriage of the vehicle. Fluid Film should not be directly applied to any weatherstripping as, in time, it will cause the rubber to expand.

Made in the USA.

Fluid Film is the Exceptional Choice for Automotive Applications
The destructive force of corrosion is the single greatest threat to your vehicle. Consistent exposure to a wide range of elements such as sun, rain, wind and snow can lead to rapid deterioration of metal, not only resulting in poor appearance and loss of value, but hazardous safety issues as well. Road salt, brine and debris also kick up and cling to vehicle under-bodies, eating away at metal and electrical connections.

Fluid Film is manufactured using an intricate heating and blending process, which combines unrefined wool wax with selective polar agents and corrosion inhibitors, creating a unique, lanolin-based formulation that stops existing rust on contact. Penetrating on contact, it creates a fluid, self-healing barrier that is always active and will not chip or crack, protecting vehicle undercoating’s and exposed metals for extended periods of time. Safe for use on all metals, it will stop pitting in chrome, will not harm most paints or plastic, and has exceptional lubricating properties, penetrating to stop squeaks and provide lasting lubricity for all moving parts. Electrically non conductive, Fluid FIlm has a high flash point and a thin, flexible composition, making it a perfect protectant for battery terminals and electrical connections.

Care should be taken around non oil resistant rubber goods. May cause swelling. Fluid Film may soften some vehicle undercoatings. This includes undercoating type paints. Check with dealer/manufacturer for compatibility.

Fluid Film is non-conductive, so clean around battery terminals, make connections and then spray with Fluid Film. The non-drying characteristics of Fluid Film provide long-term protection in this application. Fluid Film also keeps battery hold downs from corroding. Unprotected terminals can lead to corrosion of the wiring harness, resulting in expensive repairs.

Fluid Film provides slick, lasting lubrication that could last up to 36 months in locks, or hinges and seat tracks under normal operating conditions. It also keeps locks from freezing, even in sub-zero temperatures. A small amount is all that is needed to keep locks buttery smooth. Great for fixing problem locks.