Raybuck Autobody Parts LLC - Zero Rust Metal Coating

Zero Rust is a direct-to-metal, rust and corrosion control coating that acts as an impermeable barrier at the steel level. Available colors are listed with each category. It dries to a Satin Finish, but Crystal Coat is also available for a glossy finish and additional UV protection.

• Provides superior rust control - chemical, heat and abrasion resistant.
• Starves oxygen & moisture from the metal surface preventing the formation of rust.
• Field tested for over 16 years with proven results.
• ASTM-B117 exceeds 2000 hours salt spray test at 3 mils dry film thickness.
• Easy-to-use, single package convenience eliminates mixing as in 2-part epoxy paints allowing leftovers to be stored, NOT trashed!
• Outperforms epoxy with no time constraints and easy touch ups.
• 40% harder than epoxy and 25% harder than urethane, yet does not get brittle.
• Easy clean-up with xylene or lacquer thinner.
• Longer shelf life than the competition!
• High solids content for superior coverage and performance.
• Environmentally friendly, low in volatile organic compounds (VOC's)
• Safe to use - contains no lead, barium, isocyanates or epichlorohydrins.
• Can be used either as a primer or satin finish final coat.
• Can be used on metal, concrete or wood!