1963-1966 Chevy/GMC Pickup Full Cab Floor Assembly without Transmission Cover Cutout

(0) Reviews: Write the first review!
PART#: 0848-208 STARTING AT $775.91
Freight Shipping

In stock

You can earn points for purchasing this product.
Brand: Key Parts
  • This field is for validation purposes and should be left unchanged.
SKU: 0848-208 Categories: , ,
Approximate Part Dimensions (in): 69 x 11 x 50 Shipping Estimate: from manufacturer in 10-14 days Return Policy
Weight (lbs): 78 lbs Shipping Policy
Approximate Thickness(ga):18 Freight Policy: Our Freight Shipping Policy applies to this item.
Please note that all freight shipments MUST be inspected prior to the driver leaving. No damage claims can be submitted once you sign the bill of lading and the driver leaves. It is your responsibility to remove items from the carrier's truck, take them out of their packaging and inspect them.

Description

** Fits 2WD trucks. For 4WD trucks see part number 0848-207

** Does not fit trucks with Torsion bar front suspension.

** NOTE: THIS MAY BE USED ON 1960-1962 BUT THE FRONT FLOOR SUPPORT BOLT HOLES NEED TO BE DRILLED. THESE COME DRILLED FOR THE 1963-1966
This 1963-1966 GM Pickup Cab Floor Assembly fits 1963, 1964, 1965, 1966 Chevy or GMC Pickup Truck. Does not fit trucks with Torsion bar front suspension.

Most likely you’re looking at this page because the floors in your vehicle were feeling soft, and when you lifted the flooring you noticed that it was the only thing keeping your feet from hitting the ground. Floor pans take a beating from the elements, and tend to trap moisture coming up from the ground as well as moisture dripping off of your boots. The good news is that we have a wide selection of replacement floor panels to help you fix your ride.

All of our replacement floor panels are stamped steel. The stamping process starts with a 3D scan of an OEM part which produces an OEM-like fitment. The old panel will need to be cut out so that the new one can be welded in its place.

Each panel has a protective (EDP, Galvanized, etc.) coating for additional corrosion protection. The e-coating leaves a black finish that can be scuffed and painted over. For best finishing results we recommend scuffing the e-coat, priming, and then top coating with an automotive grade paint.

Whether you need to replace the the driver side, the passenger side, front or rear, we have the parts that you’re looking for. Replace your rusted floor pans by ordering this 1963-1966 GM Pickup Cab Floor Assembly from Raybuck Auto Body Parts today.

Reviews

There are no reviews yet

Be the first to review “1963-1966 Chevy/GMC Pickup Full Cab Floor Assembly without Transmission Cover Cutout”

Your email address will not be published. Required fields are marked *

Questions and answers

There are no questions yet. Be the first to ask a question about this product.