1967-1972 Gm Pickup Full Floor Pan Assembly-0849-243

1967-1972 Pickup FULL CAB FLOOR ASSEMBLY FOR 4WD, OR “HIGH HUMP”

4.00 out of 5 based on 1 customer rating
(1 customer review)
PART#: 0849-243 STARTING AT $583.20
Freight Shipping

Only 2 left in stock

Purchase & earn 583 points!
Brand: Key Parts
  • This field is for validation purposes and should be left unchanged.
SKU: 0849-243 Categories: , ,
Approximate Part Dimensions (in): 69 x 53 x 10 Shipping Estimate: from manufacturer in 5-7 days Return Policy
Weight (lbs): 77 lbs Shipping Policy
Freight Policy: Our Freight Shipping Policy applies to this item.
Please note that all freight shipments MUST be inspected prior to the driver leaving. No damage claims can be submitted once you sign the bill of lading and the driver leaves. It is your responsibility to remove items from the carrier's truck, take them out of their packaging and inspect them.

Description

This full cab floor assembly with all braces and cab support fits:

1967-1972 Chevrolet 4wd, or “High Hump” floor, Pickup Truck
1967-1972 GMC 4wd, or “High Hump” floor, Pickup Truck
Weight 77 lb

***Floor Pan Includes Rails & Brackets***

*** Bolt on transmission cover is part number 0849-218***
This 1967-1972 Full Cab Floor Assembly for 4WD, or “High Hump”,fits 1967, 1968, 1969, 1970, 1971, 1972 Chevy or GMC Pickup Truck.

Most likely you’re looking at this page because the floors in your vehicle were feeling soft, and when you lifted the flooring you noticed that it was the only thing keeping your feet from hitting the ground. Floor pans take a beating from the elements, and tend to trap moisture coming up from the ground as well as moisture dripping off of your boots. The good news is that we have a wide selection of replacement floor panels to help you fix your ride.

All of our replacement floor panels are stamped steel. The stamping process starts with a 3D scan of an OEM part which produces an OEM-like fitment. The old panel will need to be cut out so that the new one can be welded in its place.

Each panel has a protective (EDP, Galvanized, etc.) coating for additional corrosion protection. The e-coating leaves a black finish that can be scuffed and painted over. For best finishing results we recommend scuffing the e-coat, priming, and then top coating with an automotive grade paint.

Whether you need to replace the the driver side, the passenger side, front or rear, we have the parts that you’re looking for. Replace your rusted floor pans by ordering this 1967-1972 Full Cab Floor Assembly for 4WD, or “High Hump” from Raybuck Auto Body Parts today.

1 review for 1967-1972 Pickup FULL CAB FLOOR ASSEMBLY FOR 4WD, OR “HIGH HUMP”

4.0
Based on 1 review
5 star
0%
4 star
100
100%
3 star
0%
2 star
0%
1 star
0%

  1. Jed –

    I’m pleased with the product and shipping I received from Raybuck Auto. Unfortunately, the picture is misleading because it shows the transmission cover and the description says that it is a complete floor, however, the transmission cover does not come with the “complete” floor.

    (0) (0)
Add a review

Your email address will not be published. Required fields are marked *

Questions and answers

    Who is the manufacturer of your body patch panels?
  1. 0 votes
    Q Who is the manufacturer of your body patch panels? answer now
    Asked by Les Volk on December 7, 2021 12:06 am
    Answered by the admin Key parts or Dynacorn
    2. Could this pan be adapted into a 1971 Blazer
  2. 0 votes
    Q Could this pan be adapted into a 1971 Blazer answer now
    Asked by Todd Sample on August 14, 2021 1:05 pm
    Answered by the admin I guess it would be possible , but I am not sure how different the Blazer floor is compared to the Pickup.