Description
Order a 1982-1993 S10/S15 Pickup, 1983-1994 S10/S15 Blazer/Jimmy, 1991-1994 Oldsmobile Bravada (2 door only) OEM Style Rocker Panel Driver Side from Raybuck
This 1982-1994 S10 / S15 Rocker Panel, Driver Side fits 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994 Chevy, GMC, Oldsmobile Bravada, S10 Blazer, S10 Pickup Truck, S15 Jimmy, S15 Pickup Truck.
Rocker panels take a beating from the elements and road debris. They are some of the first body panels on your vehicle to start showing signs of wear, and will usually be one of the first panels to rust out. If you’re thinking “I’d rather fix my rust than buy a new vehicle”, you’ve come to the right place.
All of our rocker panels are stamped steel. The stamping process starts with a 3D scan of an OEM part which produces an OEM-like fitment. The old panel will need to be cut out so that the new one can be welded in its place. The exception to this is”Slip-on”panels. Any panel labeled as “Slip-on” (may be Stamped or brake-made) can be placed over top of the original panel, and secured with an adhesive like Silaprene, epoxy, rivets, welded, etc.
Each panel is has a protective (EDP, Galvanized, etc.) coating for additional corrosion protection. The e-coating leaves a black finish that can be scuffed and painted over. For best finishing results we recommend scuffing the e-coat, priming, and then top coating with an automotive grade paint.
We also carry a wide selection of inner rocker panels, cab corners, and floor pans. So whether you need to replace the driver side, passenger side, inner or outer rocker, we have the parts that you’re looking for.
Replace your rusted rocker panel by ordering this 1982-1994 S10 / S15 Rocker Panel, Driver Side from Raybuck Auto Body Parts today.
Bob –
Got a 95 rocker had to cut in half to fit then flatten body line flat. Iam not sure if a 92 rocker panel would have fit better or not. This not a restoration just a dirt trail runner so ok is good enough for me.floor pan did fit good
Tony Hash –
I initially thought the parts were of great quality. The metal itself is but the rocker panels I purchased were not. They were actually 1/4″ too narrow in depth at the step plate and a little too short in length. I called for customer service before ordering the parts to make sure I was ordering the correct ones and got very good help from them.
Jack Eckenrode –
Also too short and not exactly right causing me much extra work and not a good job. So I still have the panel for the passenger side that I will not use.