1987-1998 Ford Pickup 8′ Bedside Outer Skin ,Passenger Side

Freight Shipping
PART#: DYN3267H STARTING AT $574.56

This 8ft bedside skin, passenger side fits:

1987-1996 Ford F-150
1987-1998 Ford F-250/350

Measurement 103 x 32 x 9″
Weight 51lb

***Not For Stepside/Flareside/Dually***
This is the Right side panel. You can find the Left side panel here DYN3267K


Our Freight Shipping Policy applies to this item.
Please note that all freight shipments MUST be inspected prior to the driver leaving. Frieght on large items (bed floors, etc) is estimated and may change based on shipping location. We will contact you prior to shipment if the estimated charge is incorrect.No damage claims can be submitted once you sign the bill of lading and the driver leaves. It is your responsibility to remove items from the carrier's truck, take them out of their packaging and inspect them.Oversize Shipping: XL Freight 90L

Out of stock

Enter your email to get notified when available

Description

This 1987-1998 Ford Pickup 8′ outer skin, Passenger Side fits 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, Ford F150, and 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998 Ford F-250 and F-350 Pickup Truck.

The bed of your truck can haul anything from some camping gear to a load of gravel. You’ve protected the inside of the bed with a slide-in or a spray-on bed liner, and maybe you’ve even had the underside sprayed with undercoating. It’s almost inevitable, though, that road salt and moisture will penetrate these barriers and start to rust the more vulnerable areas, like the lower quarters and wheel arches. Replacing the entire bed can be costly, which is why we sell a wide selection of truck bed repair panels.

All of our replacement bed panels are constructed of heavy gauge stamped steel that meets or exceeds the thickness of the original body panel that it’s replacing. The stamping process starts with a 3D scan of an OEM part, which means that these aftermarket panels will be an exact match to the original part’s shape. Since the panels are an exact match, the old panel will need to be cut out so that the new one can be welded in its place.

Each panel has an EDP coating for additional corrosion protection. The e-coating leaves a black finish that can be scuffed and painted over. For additional rust protection, we offer ZeroRust which is a rust-inhibiting paint. We also offer a selection of undercoating materials as well as DIY spray-on bedliner kits.

Whether you need to replace the whole bed skin or just a portion of it, we have the parts that you’re looking for. Replace your rusted bed side skin by ordering this 1987-1998 Ford Pickup bed side outer skin from Raybuck Auto Body Parts today.

Questions and answers

There are no questions yet. Be the first to ask a question about this product.