Description
Rear Upper Shock Mount Kit For:
1988-1998 Chevy K Series 1500 Pickup, Driver Side
1988-1998 GMC K Series 1500 Pickup, Driver Side
1988-1998 Chevy K Series 2500 Pickup, Driver Side
1988-1998 GMC K Series 2500 Pickup, Driver Side
1988-1998 Chevy K Series 3500 Pickup, Driver Side
1988-1998 GMC K Series 3500 Pickup, Driver Side
****Will NOT Fit Dually.****
****Kits Come Complete With High Quality Hardware Necessary For Installation.****
This 1988-1998 Chevy/GMC K Series Pickup 4WD Rear Upper Shock Mount Kit, Driver Side fits 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998 Chevy or GMC Pickup Truck.
Rust doesn’t discriminate. It forms on almost every vehicle and on every exterior steel body panel. If you’re vehicle is exposed to salt spray, it’s most likely going to rust even faster, and usually by the time you see bubbles the situation is a lot worse than it appears. A lot of body panels will rust from the inside out, so those paint bubbles are like the tip of the iceberg. Poke it with your finger and all of the sudden you find a hole that goes completely through the panel. There’s also a good chance that the body panel behind or next to the bubbled one is also rusted. Rust is nasty, but we have the body repair panels to help fix your rust problems.
All of our rust replacement body panels are stamped steel. The stamping process starts with a 3D scan of an OEM part which produces an OEM-like fitment. The old panel will need to be cut out so that the new one can be welded in its place.
Each panel has a protective (EDP, Galvanized, etc.) coating for additional corrosion protection. The e-coating leaves a black finish that can be scuffed and painted over. For additional rust protection, we offer ZeroRust which is a rust-inhibiting paint, as well as a selection of undercoating materials.
Whether you need to replace a lower quarter panel, a dog leg, a footwell, or door pillar, we have the parts that you’re looking for. Fix the rust on your vehicle by ordering this 1988-1998 Chevy K Series 4WD Rear Upper Shock Mount Kit, Driver Side from Raybuck Auto Body Parts today.
Cody Honaker –
This side took a bit to get in as the bolts lined up okay but was just a tight spot to get your tools to install. Overall a great product and will not rustout for years to come
Cody Honaker –
Getting off the old mounts took longer than slipping these on and works flawlessly
Peter s. –
I bought these to replace the rusted out mounts on my 93 GMC. They came in a few days later,which worked out perfect. They fit right in place,bolts and all. Will be getting another set for my yukon when the time comes. Perfect!!!!!