1988-1998 GM CK Pickup Door Skin Passenger Side

1988-1998 Chevy/GMC C/K Pickup Door Skin, Passenger Side

4.00 out of 5 based on 1 customer rating
(1 customer review)
PART#: 0852-172 STARTING AT $35.15

This is the Right side panel. You can find the Left side panel here 0852-171

In stock

Purchase & earn 35 points!
Brand: Key Parts
  • This field is for validation purposes and should be left unchanged.
SKU: 0852-172 Categories: , , Tag:
Approximate Part Dimensions (in): 48 x 9 x 1.5 Shipping Estimate: from manufacturer in 5-7 days Return Policy
Weight (lbs): 7 lbs Shipping Policy
Approximate Thickness(ga):17 Freight Policy:

Description

Order a 1988-1998 GM C/K Pickup Door skin, Passenger Side from Raybuck. This 1988-1998 GM C/K Door skin 9″ High, Passenger Side fits 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998 Chevy or GMC Pickup Truck.

Are the lower portion of the doors on your vehicle starting to bubble? If so, the rot is probably worse than you think. By the time you see bubbles, there’s usually a lot of rust built up behind it. This area rusts out on most vehicles that are driven a lot. Salt and road debris are constantly thrown at them while driving, compromising the exterior of the door. Water makes its way through your door’s weatherstripping and pools in the bottom of the door, causing it to rust from the inside out. Any body panel taking this type of abuse from both sides is eventually going to break down and need to be replaced. The good news is that if you catch it in time, you can replace the lower door skin, or the lower door panel, instead of having to replace the entire door.All of our door skins and inner door panels are stamped steel. The stamping process starts with a 3D scan of an OEM part which produces an OEM-like fitment. The old panel will need to be cut out so that the new one can be welded in its place.Each panel has a protective (EDP, Galvanized, etc.) coating for additional corrosion protection. The e-coating leaves a black finish that can be scuffed and painted over. For best finishing results we recommend scuffing the e-coat, priming, and then top coating with an automotive grade paint.When replacing a lower door skin, we recommend using a door skin hammer for re-pinching the edge of the panel around the door shell. After installation, we also recommend coating the inside of the door with an innerpanel rustproofing or cavity wax to keep is sealed from future water pooling.Whether you need to replace the lower skin, the inner lower panel, or both, we have the parts that you’re looking for. Replace your rusted door bottom by ordering this 1988-1998 GM C/K Doorskin 9″ High, Passenger Side from Raybuck Auto Body Parts today.

1 review for 1988-1998 Chevy/GMC C/K Pickup Door Skin, Passenger Side

4.0
Based on 1 review
5 star
0%
4 star
100
100%
3 star
0%
2 star
0%
1 star
0%

  1. ed eberhardt –

    reasonably priced and on stock item,would recommend to everyone

    (0) (0)
Add a review

Your email address will not be published. Required fields are marked *

Questions and answers

    Do you happen to have inner and outer kit for both sides? 93 Chevy c1500 single cab?
  1. 0 votes
    Q Do you happen to have inner and outer kit for both sides? 93 Chevy c1500 single cab? answer now
    Asked by Mike Tremonti on November 19, 2023 8:01 pm
    Answered by the admin

    We don't sell these as a kit, but you can find the out skins and inner bottoms in this listing Search Results for “1990 chevy pickup door” (raybuck.com)
    Answered by the admin

    We don't sell these as a kit, but you can find the out skins and inner bottoms in this listing Search Results for “1990 chevy pickup door” (raybuck.com)
    2. Are these pre bent at the bottom to over lap the inner door skin?
  2. 0 votes
    Q Are these pre bent at the bottom to over lap the inner door skin? answer now
    Asked by Mike Tremonti on November 19, 2023 7:56 pm
    A No, it's just the outer shell.
    A Yes there was about a half inch at the bottom. It is only bent at a 90 so you will have to fold it the rest of the way over
    A Yes, and fit properly
    Answered by the admin These have the material on a 90 degree angle, you will need to complete the fold during installation.