1995-2005 Chevy Cavalier 4-Door Rocker Panel, Passenger Side

5.00 out of 5 based on 1 customer rating
(1 customer review)
PART#: 0822-106 STARTING AT $61.20

This is the Right side panel. You can find the Left side panel here 0822-105

In stock

Purchase & earn 61 points!
Brand: Key Parts
  • This field is for validation purposes and should be left unchanged.
Approximate Part Dimensions (in): 69 x 5.75 x 4.5 Shipping Estimate: from manufacturer in 5-7 days Return Policy
Weight (lbs): 7 lbs Shipping Policy
Freight Policy:

Description

1995-2005 Chevy Cavalier 4-Door Rocker Panel, Passenger Side.
This 1995-2005 Chevy Cavalier 4-Door Rocker Panel, Passenger Side fits 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 Chevrolet Cavalier.

Rocker panels take a beating from the elements and road debris. They are some of the first body panels on your vehicle to start showing signs of wear, and will usually be one of the first panels to rust out. If you’re thinking”I’d rather fix my rust than buy a new vehicle” you’ve come to the right place.

All of our rocker panels are stamped steel. The stamping process starts with a 3D scan of an OEM part which produces an OEM-like fitment. The old panel will need to be cut out so that the new one can be welded in its place. The exception to this is”Slip-on”panels. Any panel labeled as”Slip-on”(may be Stamped or brake-made) can be placed over top of the original panel, and secured with an adhesive like Silaprene, epoxy, rivets, welded, etc.

For best finishing results we recommend scuffing the e-coat, priming, and then top coating with an automotive grade paint.

We also carry a wide selection of inner rocker panels, cab corners, and floor pans. So whether you need to replace the driver side, passenger side, inner or outer rocker, we have the parts that you’re looking for.

Replace your rusted rocker panel by ordering this 1995-2005 Chevy Cavalier 4-Door Rocker Panel, Passenger Side from Raybuck Auto Body Parts today.

1 review for 1995-2005 Chevy Cavalier 4-Door Rocker Panel, Passenger Side

5.0
Based on 1 review
5 star
100
100%
4 star
0%
3 star
0%
2 star
0%
1 star
0%
  1. Hank

    I purchased this rocker panel for my 2001 Chevy Cavalier because the rocker panels on both sides had rotted through and it would not pass MA inspection. I cut the new passenger side rocker panel from Raybuck in half and used the other half on the driver side. It fit fine. I used self tapping sheet metal screws and pop rivets to attach the new panels over the old panels. I cleaned out the chunks of rusted metal and wire brushed it before installing the new panels. So, in conclusion, an excellent product that did the trick. Went back and the car passed inspection, no problem.

    (0) (0)
Add a review

Your email address will not be published. Required fields are marked *

Questions and answers

There are no questions yet. Be the first to ask a question about this product.