Dodge Fullsize Pickup Front Lower Doorskin Quad Cab Driver Side image .png

2002-2008 Dodge Ram Pickup Front Lower Door Skin (Quad Cab) Driver Side

5.00 out of 5 based on 1 customer rating
(1 customer review)
PART#: 1583-173 STARTING AT $74.40

This is the Left side panel. You can find the Right side panel here 1583-174

In stock

Purchase & earn 74 points!
Brand: Key Parts
  • This field is for validation purposes and should be left unchanged.
SKU: 1583-173 Categories: , , Tag:
Approximate Part Dimensions (in): 45.25 x 12 x 1.75 Shipping Estimate: from manufacturer in 5-7 days Return Policy
Weight (lbs): 6 lbs Shipping Policy
Freight Policy:

Description

Front Lower Doorskin (Quad Cab) Driver Side For:2002-2008 Dodge 1500 Full Size Pickup2003-2008 Dodge 2500/3500 Full Size Pickup. This 2002-2008 Dodge Full Size Pickup Front Lower Doorskin (Quad Cab) Driver Side fits 2002, 2003, 2004, 2005, 2006, 2007, 2008 Dodge Pickup Truck.

 

Are the lower portion of the doors on your vehicle starting to bubble? If so, the rot is probably worse than you think. By the time you see bubbles, there’s usually a lot of rust built up behind it. This area rusts out on most vehicles that are driven a lot. Salt and road debris are constantly thrown at them while driving, compromising the exterior of the door. Water makes its way through your door’s weatherstripping and pools in the bottom of the door, causing it to rust from the inside out. Any body panel taking this type of abuse from both sides is eventually going to break down and need to be replaced. The good news is that if you catch it in time, you can replace the lower door skin, or the lower door panel, instead of having to replace the entire door.All of our door skins and inner door panels are stamped steel. The stamping process starts with a 3D scan of an OEM part which produces an OEM-like fitment. The old panel will need to be cut out so that the new one can be welded in its place.Each panel has a protective (EDP, Galvanized, etc.) coating for additional corrosion protection. The e-coating leaves a black finish that can be scuffed and painted over. For best finishing results we recommend scuffing the e-coat, priming, and then top coating with an automotive grade paint.When replacing a lower door skin, we recommend using a door skin hammer for re-pinching the edge of the panel around the door shell. After installation, we also recommend coating the inside of the door with an innerpanel rustproofing or cavity wax to keep is sealed from future water pooling.Whether you need to replace the lower skin, the inner lower panel, or both, we have the parts that you’re looking for. Replace your rusted door bottom by ordering this 2002-2008 Dodge Full Size Pickup Front Lower Doorskin (Quad Cab) Driver Side from Raybuck Auto Body Parts today.

1 review for 2002-2008 Dodge Ram Pickup Front Lower Door Skin (Quad Cab) Driver Side

5.0
Based on 1 review
5 star
100
100%
4 star
0%
3 star
0%
2 star
0%
1 star
0%

  1. Frank Marsh –

    Part fit well. make of good quality . gauge thickness appeared to be heavier than the oem door.

    (0) (0)
Add a review

Your email address will not be published. Required fields are marked *

Questions and answers

    can I just slip this over the lower door instead of cutting it out?
  1. 0 votes
    Q can I just slip this over the lower door instead of cutting it out? answer now
    Asked by mike on May 27, 2021 11:40 pm
    A I don’t think so. I cut the bottom half of the door off and glued the panel on.
    A I cut out all the old rusty section and just welded this new piece in, best to get rid of the old bad metal and have a new piece to finish and paint. A little extra work up front but really nice after. Parts are a perfect fit for my 2008 Dodge Ram 1500. I also don't really think it will slide over very easy as it's exactly the same width as old skin and you probably would be tight on side jamb edges if you forced it over exsisting door.
    Answered by the admin It is made to be a weld in panel. As others have mentioned it probably will not fit without doing some cutting.