This F150 front lower quarter panel section without molding holes, driver’s side fits 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 Ford trucks.
Is the lower portion of the bed on your truck starting to bubble? If so, the rot is probably worse than you think. By the time you see bubbles, there’s usually a lot of rust built up behind it. This area rusts out on most trucks that are driven a lot. Salt and road debris are constantly thrown at them while driving, compromising both the exterior and underside of the bed. Any body panel taking this type of abuse from both sides is eventually going to break down and need to be replaced. The good news is that if you catch it in time, you can replace the lower bed sections instead of having to replace the entire box.
All of our truck bed repair panels are constructed of heavy gauge stamped steel that meets or exceeds the thickness of the original body panel that it’s replacing. The stamping process starts with a 3D scan of an OEM part, which means that these aftermarket panels will be an exact match to the original part’s shape. Since the panels are an exact match, the old panel will need to be cut out so that the new one can be welded in its place.
Each panel has an EDP coating for additional corrosion protection. The e-coating leaves a black finish that can be scuffed and painted over. For best finishing results we recommend scuffing the e-coat, priming, and then top coating with an automotive grade paint.
Whether you need to replace the lower front section, the lower rear section, or both, we have the parts that you’re looking for. Replace your rusted lower bed sction by ordering this F150 front lower quarter panel section without molding holes, driver’s side, from Raybuck Auto Body Parts today.