2009-2014 Ford F150 Light Duty Pickup Upper Rear Wheel Arch Driver Side

5.00 out of 5 based on 2 customer ratings
(2 customer reviews)
PART#: 1989-147 STARTING AT $89.90

This is the Left side panel. You can find the Right side panel here 1989-148

In stock

Purchase & earn 90 points!
Brand: Key Parts
  • This field is for validation purposes and should be left unchanged.
Approximate Part Dimensions (in): 49.5 x 21 x 1.5 Shipping Estimate: from manufacturer in 5-7 days Return Policy
Weight (lbs): 10 lbs Shipping Policy
Freight Policy:

Description

This rear upper wheel arch w/o molding holes, driver’s side, fits:

2009-2014 Ford F-150 Pickup Truck
Weight 10lb

***Not For Stepside/Flareside/Dually***

Want to verify your bed size? Check out our truck bed reference chart.
This 2009-2014 Ford F150 Light Duty Pickup Upper Rear Wheel Arch Driver Side fits 2009, 2010, 2011, 2012, 2013, 2014 Ford Pickup Truck.

The rear wheel openings on your vehicle are constantly sprayed with salt and road debris as you drive. It’s only a matter of time before the mix of water, salt, and mud causes corrosion to form. Before you know it, you see the dreaded paint bubbles starting to form around the lip of the wheel arch. The good news is that if you catch it in time, you can sometimes replace just the area of the arch that’s rusting out. If paint is already falling off, and you’re able to poke your finger through the side of your vehicle, you may need to replace the entire wheel arch and possibly the inner wheelhouse. Whether the rear wheel opening on your vehicle is just starting to bubble, or is completely rusted out, we have the wheel arch repair panels to help you fix your rust problem.

All of our wheel arch patch panels are stamped steel. The stamping process starts with a 3D scan of an OEM part which produces an OEM-like fitment. The old panel will need to be cut out so that the new one can be welded in its place.

For most trucks, if you’re not as worried about the appearance, you can usually slip these arches over top of your existing panel and secure them with an adhesive like Silaprene. If doing this, we still highly recommend cutting out as much of the rust as possible, and sealing the rusted area with a rust-inhibiting paint, like ZeroRust, prior to installing the new arch.

Each panel has a protective (EDP, Galvanized, etc.) coating for additional corrosion protection. The e-coating leaves a black finish that can be scuffed and painted over. For best finishing results we recommend scuffing the e-coat, priming, and then top coating with an automotive grade paint.

Whether you need to replace the whole wheel arch or just a portion of it, we have the parts that you’re looking for. Replace your rusted wheel arch by ordering this 2009-2014 Ford F150 Light Duty Pickup Upper Rear Wheel Arch Driver Side from Raybuck Auto Body Parts today.

2 reviews for 2009-2014 Ford F150 Light Duty Pickup Upper Rear Wheel Arch Driver Side

5.0
Based on 2 reviews
5 star
100
100%
4 star
0%
3 star
0%
2 star
0%
1 star
0%
  1. Edward Springer

    The repair panel fit the box side perfect. Part came extremely fast.

    (0) (0)
  2. Mike

    The sheet metal seems to be heavier than factor and the body lines match my f150 perfectly. Shipping was very fast which always helps!

    (0) (0)
Add a review

Your email address will not be published. Required fields are marked *

Questions and answers

    Would I also want to order both the inter wheelhouse and the outer wheelhouse panels when doing a rust repair on the rear wheel arch? The rust damage is most of the arch 1 to 2 inches from the lip edge, with a the lip being gone across part of the wheel arch.
  1. 0 votes
    Q Would I also want to order both the inter wheelhouse and the outer wheelhouse panels when doing a...... Read more answer now
    Asked by Doug Michel on August 27, 2024 2:04 pm
    Answered by the admin Most times the wheelhouses are not needed, but it doesn't hurt to look at yours, and determine how long you plan to keep the truck.
  2. I have an 2014 f150 with a 6'-6" box. Will this panel fit or is there an alternate for that box length?
  3. 0 votes
    Q I have an 2014 f150 with a 6'-6" box. Will this panel fit or is there an alternate for that box l...... Read more answer now
    Asked by Mike on July 8, 2024 9:51 am
    Answered by the admin This will fit your box.
  4. What is the material made of? Steel?
  5. 0 votes
    Q What is the material made of? Steel? answer now
    Asked by Dayton Highfill on June 21, 2023 12:39 am
    A yes, steel
  6. What is the thickness or gauge of part 1989-47
  7. 0 votes
    Q What is the thickness or gauge of part 1989-47 answer now
    Asked by bob on January 1, 2023 8:06 am
    A 18-19 ga
  8. What color would PART#: 1989-147 come in if ordered?
  9. 0 votes
    Q What color would PART#: 1989-147 come in if ordered? answer now
    Asked by Charles R Fisher on April 29, 2021 3:48 pm
    Answered by the admin They come in Black primer only. It is a replacement panel that would require bodywork and paint.