1955-1959 Chevy/GMC Pickup 2nd Series Complete Cab Floor Assembly

Freight Shipping
PART#: 0847-230 STARTING AT $1,012.50

This complete cab floor assembly fits 1955-1959 Chevrolet Pickup Truck (2nd Series), 1955-1959 GMC Pickup Truck (2nd Series)

Measurement 74x44x13
Weight 68 lb


Our Freight Shipping Policy applies to this item.
Please note that all freight shipments MUST be inspected prior to the driver leaving. Frieght on large items (bed floors, etc) is estimated and may change based on shipping location. We will contact you prior to shipment if the estimated charge is incorrect.No damage claims can be submitted once you sign the bill of lading and the driver leaves. It is your responsibility to remove items from the carrier's truck, take them out of their packaging and inspect them.

In stock

You can earn points for purchasing this product.
Brand: Key Parts
  • This field is for validation purposes and should be left unchanged.
SKU: 0847-230 Categories: , ,

Description

This 1955-1959 GM Truck 2nd Series Complete Cab Floor Assembly fits 1955, 1956, 1957, 1958, 1959 Chevy or GMC Pickup Truck.

Most likely you’re looking at this page because the floors in your vehicle were feeling soft, and when you lifted the flooring you noticed that it was the only thing keeping your feet from hitting the ground. Floor pans take a beating from the elements, and tend to trap moisture coming up from the ground as well as moisture dripping off of your boots. The good news is that we have a wide selection of replacement floor panels to help you fix your ride.

All of our replacement floor panels are constructed of heavy gauge stamped steel that meets or exceeds the thickness of the original body panel that it’s replacing. The stamping process starts with a 3D scan of an OEM part, which means that these aftermarket panels will be an exact match to the original part’s shape. Since the panels are an exact match, the old panel will need to be cut out so that the new one can be welded in its place.

Each panel has an EDP coating for additional corrosion protection. The e-coating leaves a black finish that can be scuffed and painted over. For best finishing results we recommend scuffing the e-coat, priming, and then top coating with an automotive grade paint.

Whether you need to replace the the driver side, the passenger side, front or rear, we have the parts that you’re looking for. Replace your rusted floor pans by ordering this 1955-1959 GM Truck 2nd Series Complete Cab Floor Assembly from Raybuck Auto Body Parts today.

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “1955-1959 Chevy/GMC Pickup 2nd Series Complete Cab Floor Assembly”

Use one of the allowed file type: jpg,png. The max size allowed is : 5 MB.

    Questions and answers

    There are no questions yet. Be the first to ask a question about this product.