1980-1986 Ford Pickup Large Wheel Arch, Driver Side

(0) Reviews: Write the first review!
PART#: DYN3269K STARTING AT $101.26
Freight Shipping

This is the Left side panel. You can find the Right side panel here DYN3269J

Only 2 left in stock

You can earn points for purchasing this product.
Brand: Dynacorn
  • This field is for validation purposes and should be left unchanged.
Approximate Part Dimensions (in): Shipping Estimate: from manufacturer in 3-5 days Return Policy
Weight (lbs): 25 lbs Shipping Policy
Approximate Thickness(ga):20 Freight Policy: Our Freight Shipping Policy applies to this item.
Please note that all freight shipments MUST be inspected prior to the driver leaving. No damage claims can be submitted once you sign the bill of lading and the driver leaves. It is your responsibility to remove items from the carrier's truck, take them out of their packaging and inspect them.

Description

This large wheel arch, driver’s side fits 1980-1986 Ford F-Series Pickup

Measurement 62x30x5
Weight 25lb
This 1980-1986 Ford Pickup Large Wheel Arch, Driver’s Side fits 1980, 1981, 1982, 1983, 1984, 1985, 1986 Ford Pickup Truck.

The rear wheel openings on your vehicle are constantly sprayed with salt and road debris as you drive. It’s only a matter of time before the mix of water, salt, and mud causes corrosion to form. Before you know it, you see the dreaded paint bubbles starting to form around the lip of the wheel arch. The good news is that if you catch it in time, you can sometimes replace just the area of the arch that’s rusting out. If paint is already falling off, and you’re able to poke your finger through the side of your vehicle, you may need to replace the entire wheel arch and possibly the inner wheelhouse. Whether the rear wheel opening on your vehicle is just starting to bubble, or is completely rusted out, we have the wheel arch repair panels to help you fix your rust problem.

All of our wheel arch patch panels are stamped steel. The stamping process starts with a 3D scan of an OEM part which produces an OEM-like fitment. The old panel will need to be cut out so that the new one can be welded in its place.

For most trucks, if you’re not as worried about the appearance, you can usually slip these arches over top of your existing panel and secure them with an adhesive like Silaprene. If doing this, we still highly recommend cutting out as much of the rust as possible, and sealing the rusted area with a rust-inhibiting paint, like ZeroRust, prior to installing the new arch.

Each panel has a protective (EDP, Galvanized, etc.) coating for additional corrosion protection. The e-coating leaves a black finish that can be scuffed and painted over. For best finishing results we recommend scuffing the e-coat, priming, and then top coating with an automotive grade paint.

Whether you need to replace the whole wheel arch or just a portion of it, we have the parts that you’re looking for. Replace your rusted wheel arch by ordering this 1980-1986 Ford Pickup Large Wheel Arch, Driver’s Side from Raybuck Auto Body Parts today.

https://youtu.be/zFXXC48YJ-8

Questions and answers

There are no questions yet. Be the first to ask a question about this product.