1981-1987 Regal And Cutlass Coupe Driver Side Lower Door Skin

PART#: 0724-171 STARTING AT $57.60

This Driver side lower door skin fits:

1981-1987 Buick Regal Coupe
1981-1988 Oldsmobile Cutlass 2dr

Measurement 62x10x2
Weight 4lbs
This is the Left side panel. You can find the Right side panel here 0724-172

Out of stock

Enter your email to get notified when available

SKU: 0724-171 Categories: , ,

Description

This 1981-1987 Regal And Cutlass Coupe Driver’s Side Lower Door Skin fits 1981, 1982, 1983, 1984, 1985, 1986, 1987 Buick or Oldsmobile Regal or Cutlass.

Are the lower portion of the doors on your vehicle starting to bubble? If so, the rot is probably worse than you think. By the time you see bubbles, there’s usually a lot of rust built up behind it. This area rusts out on most vehicles that are driven a lot. Salt and road debris are constantly thrown at them while driving, compromising the exterior of the door. Water makes its way through your door’s weatherstripping and pools in the bottom of the door, causing it to rust from the inside out. Any body panel taking this type of abuse from both sides is eventually going to break down and need to be replaced. The good news is that if you catch it in time, you can replace the lower door skin, or the lower door panel, instead of having to replace the entire door.

All of our door skins and inner door panels are constructed of heavy gauge stamped steel that meets or exceeds the thickness of the original body panel that it’s replacing. The stamping process starts with a 3D scan of an OEM part, which means that these aftermarket panels will be an exact match to the original part’s shape. Since the panels are an exact match, the old panel will need to be cut out so that the new one can be welded in its place.

Each panel has an EDP coating for additional corrosion protection. The e-coating leaves a black finish that can be scuffed and painted over. For best finishing results we recommend scuffing the e-coat, priming, and then top coating with an automotive grade paint.

When replacing a lower door skin, we recommend using a door skin hammer for re-pinching the edge of the panel around the door shell. After installation, we also recommend coating the inside of the door with an innerpanel rustproofing or cavity wax to keep is sealed from future water pooling.

Whether you need to replace the lower skin, the inner lower panel, or both, we have the parts that you’re looking for. Replace your rusted door bottom by ordering this 1981-1987 Regal And Cutlass Coupe Driver’s Side Lower Door Skin from Raybuck Auto Body Parts today.

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “1981-1987 Regal And Cutlass Coupe Driver Side Lower Door Skin”

Use one of the allowed file type: jpg,png. The max size allowed is : 5 MB.

    Questions and answers

      do you make the inside lower door panel for the 1987 olds cutlass salon?
    1. 0 votes
      Q do you make the inside lower door panel for the 1987 olds cutlass salon? answer now
      Asked by peter campbell on April 25, 2022 11:10 am
      A not at this time.
    2. Does this fit the 1988 Cutlass Supreme? Assuming it does, but just double checking
    3. 0 votes
      Q Does this fit the 1988 Cutlass Supreme? Assuming it does, but just double checking answer now
      Asked by Phil Inglis on April 30, 2021 3:37 pm
      Answered by the admin Yes, 0724-171 This driver's side lower door skin fits: 1981-1987 Buick Regal Coupe 1981-1988 Oldsmobile Cutlass 2dr Measurement 62x10x2 Weight 4lbs