1981-1987 Chevy/GMC Pickup High Quality Front Fender, Driver Side

Freight Shipping
PART#: 0851-003 STARTING AT $210.00

This high quality front fender, driver’s side, fits:

1981-1987 Chevrolet C/K 10,C/K 20,C/K 30 Pickup, Blazer and Suburban
1981-1987 GMC C/K 10, C/K 20, C/K 30 Pickup, Jimmy and Suburban
1988-1991 Chevrolet C/K 30 Pickup, and ALL Blazers and Suburbans
1988-1991 GMC C/K 30 Pickup, and ALL Jimmys, and Suburbans

Measurement 58x37x7
Weight 28lb
Thickness: 19ga

REPLACES: 15614467 or GM1240131
*This fender has an improved stamping and is heavier gauge than the standard value line fender.*


Our Freight Shipping Policy applies to this item.
Please note that all freight shipments MUST be inspected prior to the driver leaving. Frieght on large items (bed floors, etc) is estimated and may change based on shipping location. We will contact you prior to shipment if the estimated charge is incorrect.No damage claims can be submitted once you sign the bill of lading and the driver leaves. It is your responsibility to remove items from the carrier's truck, take them out of their packaging and inspect them.

Out of stock

Enter your email to get notified when available

SKU: 0851-003 Categories: ,

Description

This 1981-1987 GM Front Fender, Driver Side fits 1981, 1982, 1983, 1984, 1985, 1986, 1987 Chevy or GMC Blazer, Jimmy, Pickup Truck.

If your fenders are looking a little rough, whether from rust or abuse, let us help you repair them. The fenders on your vehicle get bombarded with salt and road debris. It’s only a matter of time before they start to rust. The good news is that if you catch it in time, you can sometimes replace just the area of the fender that’s rusting out. If you’re working on a restoration project and want to replace the entire fender, though, we can still help.

All of our fender patch panels are constructed of heavy gauge stamped steel that meets or exceeds the thickness of the original body panel that it’s replacing. The stamping process starts with a 3D scan of an OEM part, which means that these aftermarket panels will be an exact match to the original part’s shape. Since the panels are an exact match, the old panel will need to be cut out so that the new one can be welded in its place.

Each panel has an EDP coating for additional corrosion protection. The e-coating leaves a black finish that can be scuffed and painted over. For best finishing results we recommend scuffing the e-coat, priming, and then top coating with an automotive grade paint.

Whether you need to replace the whole fender or just a lower portion of it, we have the parts that you’re looking for. Replace your rusted fender by ordering this 1981-1987 GM Front Fender, Driver Side from Raybuck Auto Body Parts today.

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “1981-1987 Chevy/GMC Pickup High Quality Front Fender, Driver Side”

Use one of the allowed file type: jpg,png. The max size allowed is : 5 MB.

    Questions and answers

      What gauge of steel are your fenders ?? We are a Collision Center and we do about 3 restorations a year. we have three square bodies 1982 to 1987 Chev & GMC pickups to do. Our customers are very fussy.. We have ordered some restoration parts in the past and they are poor quality and do not fit well. we have not ordered from you folks and there are no reviews on your parts.what can you tell me about fit and gauge of the steel...Thanks
    1. 0 votes
      Q What gauge of steel are your fenders ?? We are a Collision Center and we do about 3 restorations ...... Read more answer now
      Asked by Tyler on February 3, 2023 2:15 am
      Answered by the admin They are 19ga and the tooling has been redone to provide a better fit compared to standard value line type fender. I have not had any reviews good or bad.
      2. What gauge of steel are your fenders ?? We are a Collision Center and we do about 3 restorations a year. we have three square bodies 1982 to 1987 Chev & GMC pickups to do. Our customers are very fussy.. We have ordered some restoration parts in the past and they are poor quality and do not fit well. we have not ordered from you folks and there are no reviews on your parts.what can you tell me about fit and gauge of the steel...Thanks
    2. 0 votes
      Q What gauge of steel are your fenders ?? We are a Collision Center and we do about 3 restorations ...... Read more answer now
      Asked by Tyler on February 3, 2023 2:15 am
      Answered by the admin

      Hi Tyler, we don't list a gauge for the fenders as it varies depending on where you take the measurement. I will say that the thickness of all of our sheet metal products will match the original parts that they replace. Fitment will be as close as it's going to get. I would say these will line right up, as they should, but I build vehicles as well and I know how these things go. You can take apart an original truck, go to put it back together, and it still doesn't like up exactly.

      I hear what you're saying about lack of reviews for some parts. We solicit reviews, but most customers t... Read more