1995-2005 Chevy S10 Blazer/GMC S15 Jimmy Front Lower Quarter Panel Section (2-Door) Driver Side

PART#: 0872-341 STARTING AT $95.20

Order a 1995-2005 S10 Blazer/S15 Jimmy (2-Door) Front Lower Quarter Panel Section Driver Side from Raybuck

Approximate thickness: 19ga
Dimensions: 22″W x 16″H

  • Will not work on ZR-2 **

This is the Left side panel. You can find the Right side panel here 0872-342

In stock

You can earn points for purchasing this product.
Brand: Key Parts
  • This field is for validation purposes and should be left unchanged.
SKU: 0872-341 Categories: ,

Description

This 1995-2005 S-10 Blazer / S-15 Jimmy Front Lower Quarter Panel Section (2-Door) Driver Side fits 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 Chevy or GMC Bravada, S10 Blazer, S15 Jimmy.

Rust doesn’t discriminate. It forms on almost every vehicle and on every exterior steel body panel. If you’re vehicle is exposed to salt spray, it’s most likely going to rust even faster, and usually by the time you see bubbles the situation is a lot worse than it appears. A lot of body panels will rust from the inside out, so those paint bubbles are like the tip of the iceberg. Poke it with your finger and all of the sudden you find a hole that goes completely through the panel. There’s also a good chance that the body panel behind or next to the bubbled one is also rusted. Rust is nasty, but we have the body repair panels to help fix your rust problems.

All of our rust replacement body panels are constructed of heavy gauge stamped steel that meets or exceeds the thickness of the original body panel that it’s replacing. The stamping process starts with a 3D scan of an OEM part, which means that these aftermarket panels will be an exact match to the original part’s shape. Since the panels are an exact match, the old panel will need to be cut out so that the new one can be welded in its place.

Each panel has an EDP coating for additional corrosion protection. The e-coating leaves a black finish that can be scuffed and painted over. For additional rust protection, we offer ZeroRust which is a rust-inhibiting paint, as well as a selection of undercoating materials.

Whether you need to replace a lower quarter panel, a dog leg, a footwell, or door pillar, we have the parts that you’re looking for. Fix the rust on your vehicle by ordering this 1995-2005 S-10 Blazer / S-15 Jimmy Front Lower Quarter Panel Section (2-Door) Driver Side from Raybuck Auto Body Parts today.

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “1995-2005 Chevy S10 Blazer/GMC S15 Jimmy Front Lower Quarter Panel Section (2-Door) Driver Side”

Use one of the allowed file type: jpg,png. The max size allowed is : 5 MB.

    Questions and answers

      do you have these for a zr-2? can i cut this one down to fit zr2?
    1. 0 votes
      Q do you have these for a zr-2? can i cut this one down to fit zr2? answer now
      Asked by JAMIE Rose on February 25, 2021 3:34 pm
      Answered by the admin Sorry, we don't
    2. WHY WONT REPAIR PANEL WORK ON A ZR2 WHEN THEY HAVE THE SAME BODIES, THE ONLY DIFFERENCE IS SUSPENSION.
    3. 0 votes
      Q WHY WONT REPAIR PANEL WORK ON A ZR2 WHEN THEY HAVE THE SAME BODIES, THE ONLY DIFFERENCE IS SUSPEN...... Read more answer now
      Asked by RON on December 19, 2020 7:50 pm
      Answered by the admin

      The bodies were different. The wheel openings and quarter panels are different on the ZR2