Description
Order a 1999-2006 Chevy Silverado or GMC Sierra Inner Rear Wheel House, Passenger Side from Raybuck. This is the piece between the inner and outer bedside skin (behind the wheel arch) and not the piece you see in the bed.
Want to verify your bed size? Check out our truck bed reference chart.
This 1999-2006 Chevy Silverado or GMC Sierra Inner Rear Wheel House (Fleetside Only), Passenger Side fits 1999, 2000, 2001, 2002, 2003, 2004, 2004, 2005, 2006 Chevy and GMC trucks. These parts are also sometimes referred to as “wheel well liners.”
The rear wheel openings on your vehicle are constantly sprayed with salt and road debris as you drive. There’s a good chance that mud is getting stuck up in there as well. It’s only a matter of time before the mix of water, salt, and mud causes corrosion to form. Before you know it, you see the dreaded paint bubbles starting to form around the lip of the wheel arch. The good news is that if you catch it in time, you can sometimes replace just the area of the arch that’s rusting out. If paint is already falling off, and you’re able to poke your finger through the side of your vehicle, you may need to replace the entire wheel arch and possibly the inner wheelhouse. Whether the rear wheel opening on your vehicle is just starting to bubble, or is completely rusted out, we have the wheel arch repair panels to help you fix your rust problem.
All of our wheel arch patch panels are stamped steel. The stamping process starts with a 3D scan of an OEM part which produces an OEM-like fitment. The old panel will need to be cut out so that the new one can be welded in its place.
For most trucks, if you’re not as worried about the appearance, you can usually slip these arches over top of your existing panel and secure them with an adhesive like Silaprene. If doing this, we still highly recommend cutting out as much of the rust as possible, and sealing the rusted area with a rust-inhibiting paint, like ZeroRust, prior to installing the new arch.
Each panel has a protective (EDP, Galvanized, etc.) coating for additional corrosion protection. The e-coating leaves a black finish that can be scuffed and painted over. For best finishing results we recommend scuffing the e-coat, priming, and then top coating with an automotive grade paint.
Whether you need to replace the whole wheel arch or just a portion of it, we have the parts that you’re looking for. Replace your rusted wheel arch by ordering this 1999-2006 Chevy Silverado/GMC Sierra Inner Rear Wheel House (Fleetside Only), Passenger Side from Raybuck Auto Body Parts today.
normkshipley –
These are good fitting parts required no alterations and decent heavy metal fit right in will be buying again
Jerry Wilson –
Bought inner wheelhouse sheet metal part for both passenger and drivers side. Had thought about trying to make my own. I was so happy I spent the money to get these. They fit great and we’re fitted and welded up in a few hours and it was done?
RICHARD A JANZEN –
Great product looks just like OME (original manufactured equipment) shipping was great, will buy from Raybuck again
Stephen Hostetter –
Great Fit, Excellent Product, Fast Shipping!
Brett –
A good fit on my 2005 Silverado 2500HD! As usual, great quality parts from RayBuck!!!
Mark –
Great products , fit perfect ,easy to install
Mark –
Fit perfect , and easy to install
Logan –
Great fit