2003-2008 Toyota Corolla Sedan Rear Wheel Arch, Driver Side

5.00 out of 5 based on 1 customer rating
(1 customer review)
PART#: 81-16-58-3 STARTING AT $88.41

This is the Left side panel. You can find the Right side panel here 81-16-58-4

Out of stock

Enter your email to get notified when available

Approximate Part Dimensions (in): 40.5 x 24 x 3.25 Shipping Estimate: from manufacturer in 10-14 days Return Policy
Weight (lbs): 4 lbs Shipping Policy
Freight Policy:

Description

This 2003-2008 Toyota Corolla Sedan Rear Wheel Arch, Driver Side fits 2003, 2004, 2005, 2006, 2007, 2008 Toyota Corolla.

The rear wheel openings on your vehicle are constantly sprayed with salt and road debris as you drive. There’s a good chance that mud is getting stuck up in there as well. It’s only a matter of time before the mix of water, salt, and mud causes corrosion to form. Before you know it, you see the dreaded paint bubbles starting to form around the lip of the wheel arch. The good news is that if you catch it in time, you can sometimes replace just the area of the arch that’s rusting out. If paint is already falling off, and you’re able to poke your finger through the side of your vehicle, you may need to replace the entire wheel arch and possibly the inner wheelhouse. Whether the rear wheel opening on your vehicle is just starting to bubble, or is completely rusted out, we have the wheel arch repair panels to help you fix your rust problem.

All of our wheel arch patch panels are stamped steel. The stamping process starts with a 3D scan of an OEM part which produces an OEM-like fitment. The old panel will need to be cut out so that the new one can be welded in its place.

For most trucks, if you’re not as worried about the appearance, you can usually slip these arches over top of your existing panel and secure them with an adhesive like Silaprene. If doing this, we still highly recommend cutting out as much of the rust as possible, and sealing the rusted area with a rust-inhibiting paint, like ZeroRust, prior to installing the new arch.

Each panel has a protective (EDP, Galvanized, etc.) coating for additional corrosion protection. The e-coating leaves a black finish that can be scuffed and painted over. For best finishing results we recommend scuffing the e-coat, priming, and then top coating with an automotive grade paint.

Whether you need to replace the whole wheel arch or just a portion of it, we have the parts that you’re looking for. Replace your rusted wheel arch by ordering this 2003-2008 Toyota Corolla Sedan Rear Wheel Arch, Driver Side from Raybuck Auto Body Parts today.

1 review for 2003-2008 Toyota Corolla Sedan Rear Wheel Arch, Driver Side

5.0
Based on 1 review
5 star
100
100%
4 star
0%
3 star
0%
2 star
0%
1 star
0%
  1. Dale Pease

    This fit my car perfectly. I was able to cut out just the section with rust, and replace it. The finished product looks almost like new. If I had one complaint, I’d say I wish it had a bit more of the panel in front of the wheel, where it wraps down to the frame. I bought this for both sides and in both cases, I could have used an inch or two to really be sure I got rid of the rust.

    (0) (0)
Add a review

Your email address will not be published. Required fields are marked *

Questions and answers

There are no questions yet. Be the first to ask a question about this product.