2007-2013 Chevy Silverado (New Body Style) Pickup Upper Rear Wheel Arch, Driver Side

5 out of 5 based on 7 customer ratings
(7 customer reviews)
PART#: 0864-147 STARTING AT $64.80

Order a 2007-2013 Chevy Silverado (New Body Style) Fleetside Pickup Upper Rear Wheel Arch, Driver Side from Raybuck

Approximate thickness: 19ga
Dimensions: 43″L x 16″H

***Not For Stepside/Flareside/Dually***

****Will NOT fit GMC Sierra****

Want to verify your bed size? Check out our truck bed reference chart.
This is the Left side panel. You can find the Right side panel here 0864-148

You can earn points for purchasing this product.

Brand: Key Parts
  • This field is for validation purposes and should be left unchanged.

Description

This 2007-2013 Chevy Silverado Upper Rear Wheel Arch, Driver Side fits 2007, 2008, 2009, 2010, 2011, 2012, 2013 Chevy trucks with fleetside beds.

The rear wheel openings on your vehicle are constantly sprayed with salt and road debris as you drive. There’s a good chance that mud is getting stuck up in there as well. It’s only a matter of time before the mix of water, salt, and mud causes corrosion to form. Before you know it, you see the dreaded paint bubbles starting to form around the lip of the wheel arch. The good news is that if you catch it in time, you can sometimes replace just the area of the arch that’s rusting out. If paint is already falling off, and you’re able to poke your finger through the side of your vehicle, you may need to replace the entire wheel arch and possibly the inner wheelhouse. Whether the rear wheel arch opening on your Chevy Silverado is just starting to bubble, or is completely rusted out, we have the wheel arch repair panels to help you fix your rust problem.

All of our wheel arch patch panels are constructed of heavy gauge stamped steel that meets or exceeds the thickness of the original body panel that it’s replacing. The stamping process starts with a 3D scan of an OEM part, which means that these aftermarket panels will be an exact match to the original part’s shape. Since the panels are an exact match, the old panel will need to be cut out so that the new one can be welded in its place.

For most trucks, if you’re not as worried about the appearance, you can usually slip these arches over top of your existing panel and secure them with an adhesive like Silaprene. If doing this, we still highly recommend cutting out as much of the rust as possible, and sealing the rusted area with a rust-inhibiting paint, like ZeroRust, prior to installing the new arch.

Each panel has an EDP coating for additional corrosion protection. The e-coating leaves a black finish that can be scuffed and painted over. For best finishing results we recommend scuffing the e-coat, priming, and then top coating with an automotive grade paint.

Whether you need to replace the whole wheel arch or just a portion of it, we have the parts that you’re looking for. Replace your rusted wheel arch by ordering this 2007-2013 Chevy Silverado Upper Rear Wheel Arch, Driver Side from Raybuck Auto Body Parts today.

 

Customer reviews

Rated 5 out of 5 stars
7 reviews
4 stars 0 0 %
3 stars 0 0 %
2 stars 0 0 %
1 star 0 0 %

7 reviews for 2007-2013 Chevy Silverado (New Body Style) Pickup Upper Rear Wheel Arch, Driver Side

Add a review

Use one of the allowed file type: jpg,png. The max size allowed is : 5 MB.

    Questions and answers

      Do you have to cut the old panel out or will these panels fit over the old ones
    1. 0 votes
      Q Do you have to cut the old panel out or will these panels fit over the old ones answer now
      Asked by Rick on May 15, 2021 3:20 am
      A Yes you have to remove old panel piece and weld or glue the new one in place
      A yes you do need to cut out the old panel but only remove as much as you need too , you can trim the bedside and the panel for a perfect fit
    2. What is the measurement from the top of this panel to the top of the wheel arch ?
    3. 0 votes
      Q What is the measurement from the top of this panel to the top of the wheel arch ? answer now
      Asked by Rick Shultz on February 4, 2021 8:02 pm
      Answered by the admin 6"
    4. What is the measurement from the top of this panel to the top of the wheel arch?
    5. 0 votes
      Q What is the measurement from the top of this panel to the top of the wheel arch? answer now
      Asked by Rick Shultz on February 4, 2021 8:00 pm
      Answered by the admin

      6"

    Send me a notification for each new answer.